SLK 230 (170.449) L4-2.3L SC (111.983) (2001)
Suspension Spring ( Coil / Leaf ): Removal and Replacement
AR32.20-P-0200B Remove/Install Front Spring
Removing And Installing Front Spring
NOTE: General information on springs
1
Detach upper shock absorber fixing and raise vehicle
Model 140
CAUTION: The vehicle must be on its wheels for removing the upper shock absorber fixing.
NOTE: Steady piston rod using Alien wrench
CAUTION: Installation: Replace self-locking nut (11a)
2
Insert clamping plates (01b, 01c)
3
Insert clamping device (01a)
DANGER:
-
Risk of injury from being trapped or crushed when working on preloaded springs or spring bodies
-
Only use approved clamping devices and if appropriate also screen off the danger area. Check special tools for damage and function,
(visual inspection) Wear safety gloves.
4
Clamp, unclamp front spring
5
Remove front spring (12) with rubber mount (13) forwards
6
Install in reverse order
AR32.20-P-0230A Remove/Install Rear Spring
Removing And Installing Rear Spring