SLK 280 (171.454) V6-3.0L (272.942) (2007)
3.
Unscrew bolts (Figure 3, 7) on retaining rail.
4.
Pull seal (Figure 2, Pos. 4) to stretch length by 1-2 mm and retighten bolts (Figure 3, 7).
Note:
Do not pull the seal too far forward otherwise the seals in the area of gap 1 will flatten.
5.
Close roof and windows and perform leak test.
6.
Re-install trim on front section of vario roof. roof.
7.
Lubricate seals at joints (Figure 1, Pos 1 and 2) with special lubricant, part no. A000 989 36 60, open/close vario roof several times and remove
any excess lubricant.
Note:
Crushed seals must be replaced.
8.
Check adjustment of side windows and correct the setting if necessary. Refer to WIS documents AR72.10-P-1950V (front window) and
AR67.30-P-4200V (rear side window).
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
July 11, 2008. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.