SLK 280 (171.454) V6-3.0L (272.942) (2007)
Component Identification
1
Adjust bleeding pressure at brake fluid changing unit to 2.0 bar
2
Remove bleed screw dust caps
3
Connect hose of bleed bottle (01) to bleed screw of the brake caliper (1).
4
Open bleed screw on brake caliper (1) and allow approx. 80 cm3 of brake fluid to flow out free of bubbles.
5
Repeat bleeding process at the brake calipers (2, 3, 4).
The numbering of the brake calipers (1, 2, 3, 4) indicates the order in which they should be opened during the bleeding operation
6.1
Vehicles with manual transmission
Remove the cover (5) from the bell housing and repeat bleeding process at the bleed screw of the central clutch operator.
7
Attach dust caps and cover (5).