SLK 300 (171.454) V6-3.0L (272.942) (2011)
/v6-3.0l_(272.942)/Page-66001.png)
Cylinder Head Assembly: Tools and Equipment
Guide Rail Pin Puller
AST tool# M 0734
Used for removing the most stubborn pins from the cylinder head. Unlike the short slide hammer previously used to attempt this job, the M 0734
incorporates a thrust bearing to ease the pulling action. Overall length is 85mm, which allows access to tight problem areas.
Applicable to:
Mercedes engines 116, 117, 272 and 273.
-
Made in the U.S.A.
-
Works on 272 and 273 Engines
Contact AST for pricing.
Assenmacher Specialty Tools
1-800-525-2943
