SLK 320 (170.465) V6-3.2L (112.947) (2002)
6.2 Remove poly V-belt tensioning device
7
Disconnect coolant hoses (4,5)
NOTE: check condition of coolant hoses and hose clamps, replace if necessary.
8
Disconnect coolant hose (6) at oil-water
NOTE: check condition of coolant hose and heat exchanger hose clamp, replace if necessary.
9
Take off belt pulley of coolant pump (7)
10
Remove coolant pump (8)
NOTE: Installation: Replace seal of coolant pump (9).
11
Install in the reverse order
12
Inspect cooling system for leaks.