mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR09.41-P-6831SVK Remove/Install Low Temperature Water Cooler|Page 2856 > < Radiator, Coolant Hoses|Page 2853
Page 1
background image

Radiator: Service and Repair
AR09.41-P-6831SVK Remove/Install Low Temperature Water Cooler

Remove, Install Low Temperature Water Cooler

Shown On Model 170.466

Removal/Installation

DANGER:

-

Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant.

-

Do not open cooling system unless coolant temperature is below 90 degrees C. Open cap slowly and release the pressure. Do not pour
coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection.

1

Remove lower engine compartment lining

2

Drain coolant at radiator

3

Remove front bumper

4

Slacken compact clips at low temperature water cooler
-

See Commercially Available Tools below.

5

Detach coolant hoses (1 and 2) at low temperature water cooler (110/11)

6

Unscrew nuts at stud bolts (3) of bracket for low temperature water cooler (110/11).

7

Lift low temperature water cooler (110/11) out together with air scoop (110/9)

8

Remove air scoop (110/9)

NOTE:  Only if low temperature water cooler is replaced.

9

Install in the reverse order

10

Inspect cooling system for leaks

Commercially Available Tools

AR09.41-P-6831SVK Remove/Install Low Temperature Water Cooler|Page 2856 > < Radiator, Coolant Hoses|Page 2853