SLK 32 AMG (170466) V6-32L SC (112960) (2003) | Exhaust Manifold Removal/Installation
Shown During Removal Operation
Removing, installing
DANGER: Hazard from contact with parts conducting high voltages.
-
Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry Out work
on the ignition system.
DANGER: Risk of injury from grazing or cutting body parts on sharp vehicle part
-
Always wear protective gloves when working in vicinity of sharp, burred vehicle components.
-
Deburr replacement panels.
DANGER: Risk of injury to skin and eyes from handling hot or glowing objects
-
Wear protective gloves, protective clothing and if necessary, eye protection.
1
Separate plug connection of O2 sensors
2
Remove exhaust system complete
3.1 Unbolt right engine mount at front axle carrier
NOTE: When removing right exhaust manifold.
CAUTION: Right and left engine mounts must not be slackened at the same time.
Refer to Engine Mounts, Engine Supports below
3.2 Slacken left engine mount at front axle carrier
NOTE: When removing left exhaust manifold.
CAUTION: Right and left engine mounts must not be slackened at the same time.
Refer to Engine Mounts, Engine Supports below
4
Remove air cleaner
NOTE: Removal: Remove air cleaner by lifting vertically up and off the cylinder head covers.