SLK 32 AMG (170.466) V6-3.2L SC (112.960) (2003)
/v6-3.2l_sc_(112.960)/Page-2608001.png)
Combination Switch: Service and Repair
Removing And Installing Combination Switch
1
Disconnect ground cable at the battery
CAUTION: On model 210 insulate terminal on ground cable to prevent unintentional contact between disconnected ground cable and
ground W10
2
Remove steering wheel
CAUTION: Caution when handling airbag unit Improper handling may cause damage to the airbag unit
3
Remove contact spiral
4.1 Remove cover below instrument panel (driver's side)
4.2 Remove bottom section of instrument panel (driver's side)
5
Unscrew screw (31)
6
Take out bracket (32)
7
Separate connector (S4x1)
-
Take connector out of fixture and push bar (arrow)
8
Separate connector (S40x1)
-
Cruise control (code 440a)
-
Take connector out of fixture
9
Detach wiring
10.1 Take out casing tube cover (33) together with combination switch (S4)
-
without cruise control
10.2 Take out casing tube cover (33) with combination switch (S4) and cruise control switch (S40)
-
with cruise control (code 440a)
11.1 Take combination switch (S4) out of casing tube cover
-
without cruise control
11.2 Take combination switch (S4) and cruise control switch (S40) out of casing tube cover
-
with cruise control (code 440a)
12 Reinstall in opposite order
