mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

O2 Sensors, Location/Task/Design/Function|Page 1014 > < O2 Sensors, Location/Task/Design/Function|Page 1012
Page 10
background image

G3/2 

O2 sensor upstream of TWC Engine 111, 104 

G3/3 

Left O2 sensor upstream of TWC Engine 112, 113, 119, 120 

G3/4 

Right O2 sensor upstream of TWC Engine 112, 113, 119, 120 

G3/5 

Left O2 sensor downstream of TWC Engine 112, 113, 119, 120 (USA) and EURO3/4 

G3/6 

Right O2 sensor downstream of TWC Engine 112, 113, 119, 120 (USA) and EURO3/4   

K1/2 

Overvoltage protection relay Model 124, 202 up to 7/96 

K40 

Relay module model 170, 210 up to 2/97 

K40/4 

Fuse and relay module Model 202 as of 8/96, 210 as of 3/97 

K40/7 

Right fuse and relay module Model 215, 220 (K40/4 in Model 230) 

L5 

Crankshaft position sensor 

N3/4 

HFM-SFI [HFM] control unit 

N3/10 

ME-SFI control unit 

N10/1 

Front SAM control unit with fuse and relay module Model 203 

N16/1 

Base module, model 129, 140 

 

The engine shown is engine 166 
B11/4 

Coolant temperature sensor 

G3/1 

O2 sensor downstream of TWC (low emission EURO3/D4) 

G3/2 

O2 sensor upstream of TWC 

K1/6 

Electronics relay 

L5 

Crankshaft position sensor 

N3/5 

ECM control unit (up to 08/01) 

N3/18 

ECM control unit with throttle valve actuator (as of 09/01)

The purpose of the O2 sensor heater is to rapidly heat up the O2 sensors to their operating temperature while preventing damage to the sensor ceramic as
a result of controlled heating power. 

The sensor heater is actuated by the engine control unit through ground. The performance of the sensor heater at operating temperature amounts to: 
18 w on Engine 104, 111, 119, 120 and 112, 113 with ME2.0 
12 w on Engine 166 . 
7 W on Engine 137, engine 111EVO and 112, 113 with ME 2.8 as of 06/00 

The voltage for the sensor heater is supplied by the: 
- Overvoltage protection relay model 124, 202 up to 7/96 
- Relay module, Model 170, Model 210 up to 2/97 
- Base module, Model 129, 140 
- Fuse and relay module, model 202 as of 8/96, model 210 as of 3/97, model 163 designation F1 
- Electronics relay, Model 166 
- Right fuse and relay module (K40/7), Model 215, 220 
- Right fuse and relay module (K40/4), Model 230 

O2 Sensors, Location/Task/Design/Function|Page 1014 > < O2 Sensors, Location/Task/Design/Function|Page 1012