SLK 32 AMG (170.466) V6-3.2L SC (112.960) (2003)
/v6-3.2l_sc_(112.960)/Page-1899001.png)
Ball Joint: Service and Repair
AR33.20-P-0440B Replace Supporting Joint
Replacing Supporting Joint
CAUTION: To remove and install the supporting joint the shock absorber must be installed.
1
Remove front wheel
2
Unscrew nuts from supporting joint
3
Screw thrust piece (044a) onto the respective ball pivot of the supporting joint
4
Press out supporting joint using puller (044) from steering knuckle or wishbone
5
Check supporting joint
-
Replace if necessary
