SLK 350 (171.456) V6-3.5L (272.963) (2006)
/v6-3.5l_(272.963)/Page-919001.png)
Crankshaft Main Bearing: Specifications
AR03.20-P-4351-02VA Tightening Procedure For Crankshaft Bearing Caps
AR03.20-P-4351-02VA Tightening procedure for crankshaft bearing caps
Crankshaft bearing cap
Crankshaft bearing cap
Tightening sequence for the crankshaft bearing cap and the crankshaft fitted bearing cap
Tighten the crankshaft bearing cap (2, 3, 4) and the crankshaft fitted bearing cap (1) individually in the numerical sequence. The arrow identifies
direction of travel.
Tightening sequence for bolts for the crankshaft bearing cap and the crankshaft fitted bearing cap
1
Lubricate bolts for bearing cap at thread and bolt head contact surfaces.
2
Tighten bolts for bearing cap in the specified sequence.
If no torquing angle wrench is available for the final tightening, the bearing cap bolts can be torqued further by the specified angle in a single
operation using a wrench and locking handle. Do not use a flexi-rod torque wrench for tightening in order to avoid any angle errors.
