SLK 350 (171.456) V6-3.5L (272.963) (2006)
/v6-3.5l_(272.963)/Page-935002.png)
Test values for pistons
Component Identification
1
Assign piston to the cylinder bore
Piston diameters are specified in two tolerances. The piston diameters are differentiated from each other by the identification x or (x). This is
located on the top of the piston crown. Pistons marked with x must only be installed in cylinder bores marked with x.
(x) Pistons marked with x must only be installed in cylinder bores marked with x(x).
