SLK 350 (171.456) V6-3.5L (272.963) (2006)
/v6-3.5l_(272.963)/Page-1031003.png)
Oil pan with rear sump
Oil pan with rear sump
The lines (A) identify the sealant beads.
The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm
(±0.5 mm).
The sealant must be applied within 10 min.
The sealant bead must not be spread. Only the sealant listed in the Repair Products may be used.
Oil pan with front sump
Oil pan with front sump
