SLK 350 (171.456) V6-3.5L (272.963) (2006)
/v6-3.5l_(272.963)/Page-1059002.png)
Only 1 millimeter (+/- 0.2 mm) thick silicone bead should be applied uniformly to one side of sealing surfaces on a precise pattern (refer to Figure 1 and
2 and / or WIS doc AH01.30-P-1000-08V). A small amount of oil should be applied to camshaft bearings. Sealing surfaces must be assembled within 10
minutes of sealant application.
