mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

P-07_61-78 > < Computers/Controls - ME 9.7 Control Unit Software Info.|Page 8797
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Engine Squeal On Acceleration

Date: August 18, 2008

Order No.: P-B.54.21/202

Supersedes:

Group: 54

SUBJECT:
Model 171.456, Up to VIN F070672

Squealing Noise from Engine Compartment When Accelerating

If you receive customer reports in the above model vehicle of a squealing noise coming from the engine compartment when accelerating after the engine
control unit has been flashed from VC6.x to VC9.x or VC11.x, the ignition angle correction is not active in these versions. To resolve, flash the engine
control module to VC13, (as of DAS 5/08 or higher) and perform SCN coding.

Note:

Copy of the SDS short test and all tests performed must accompany returned parts. If the documentation is missing or does not support the diagnosis,
the warranty claim may be debited.

Note:

The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
August 18, 2008. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.

In Case of Warranty, use the table.

P-07_61-78 > < Computers/Controls - ME 9.7 Control Unit Software Info.|Page 8797