mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

P-91_60-96 > < Restraints - SRS Lamp ON/DTC's 9103/9123 Stored|Page 14508
Page 3
background image

15.

Insulate the solder connectors and the repaired harness with fabric tape.

16.

Reassemble the vehicle in reverse order.

NOTE:  

Replacement of the contact spiral is not necessary. The mounting bolt for the steering wheel must always be replaced.

Parts Information

NOTE:  

The following allowable labor operations should be used when submitting a warranty claim for this repair

In Case of Warranty

Operation:
Short test, perform (54-1011)
Airbag line to steering column module, replace (02-4859)

P-91_60-96 > < Restraints - SRS Lamp ON/DTC's 9103/9123 Stored|Page 14508