mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.20-P-1003SK Switching Switch and Controls Illumination On/Off, Function|Page 2010 > < GF82.20-P-1003SK Switching Switch and Controls Illumination On/Off, Function|Page 2008
Page 3
background image

Pressing the left reading lamp switch (N70s6) or the right reading lamp switch (N70s7) in the overhead control panel control unit (N70) switches the left
reading lamp (N70e2) or the right reading lamp (N70e3) on and off in an undimmed state. The left reading lamp (N70e2) and the right reading lamp
(N70e3) are switched off automatically 30 minutes after "Circuit 15 OFF".

All vehicles, except those with code (876) interior lighting package, have a left reading lamp (N70e2) and a right reading lamp (N70e3). They are
integrated in the overhead control panel control unit (N70). The left reading lamp (A67e1) and the right reading lamp (A67e2) in the inside rearview
mirror unit (A67) are available by ordering the appropriate code (876).

GF82.20-P-2033SK Switch Dome Lamps On/Off, Function

GF82.20-P-2033SK Switch Dome Lamps On/off, Function

Manual switching on and off:
Function prerequisites:

^

Circuit 30

Press the ON/OFF dome lamp switch -(N70s4) to switch on the left interior lamp (N70e4) and the right interior lamp (N70e5) (dimmed). To switch off
the dome lamp, press the ON/OFF dome lamp switch (N70s4) again. The lamp is automatically switched off 30 minutes after the Control Area Network
bus class B (interior) (CAN-B) was deactivated. Manual switching of the interior lamp overrides all automatic interior lamp functions.

Automatic switching on and off:
Function prerequisites:

^

Circuit 30

When the vehicle is unlocked, the left interior lamp (N70e4) and the right interior lamp (N70e5) are switched on (dimmed). The lamps are automatically
switched off 30 seconds after unlocking. When the driver or the front passenger door is opened, the left interior lamp (N70e4) and the right interior lamp
are (N70e5) are switched on (dimmed). The dimmed lights are switched off under the following conditions:

^

With status "Circuit 15 ON": Immediately after the last door was closed or 30 minutes after the last door was opened.

^

With status "Circuit 15 OFF": 8 seconds after the last door was closed or automatically 5 minutes after the last door was opened.

After the transmitter key has been removed (A8/1) the left interior lamp (N70e4) and the right interior lamp (N70e5) are switched on (dimmed). They are
switched off automatically after the "Interior lamp OFF delay time" set at the instrument cluster (A1) has expired.The "OFF delay time" can be set from
0 to 20 seconds in 5-second increments.

If circuit 15 is switched on while an automatic lighting function is active, the dimmed left interior lamp (N70e4) and the right interior lamp (N70e5) are
switched off immediately.

GF82.20-P-4105SK Rotary Tumbler Microswitches, Location/Task/Design/Function

GF82.20-P-4105SK Rotary Tumbler Microswitches, Location/Task/Design/Function

Component Identification

GF82.20-P-1003SK Switching Switch and Controls Illumination On/Off, Function|Page 2010 > < GF82.20-P-1003SK Switching Switch and Controls Illumination On/Off, Function|Page 2008