mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF91.60-P-1100SK Front Passenger Seat Occupied Recognition Sensor, Function|Page 2595 > < GF91.60-P-1100SK Front Passenger Seat Occupied Recognition Sensor, Function|Page 2593
Page 1
background image

Seat Occupant Sensor: Description and Operation
GF91.60-P-4008-03SK Seat Occupied Recognition Sensor With Automatic Child Seat Recognition -
Function

GF91.60-P-4008-03SK Seat Occupied Recognition Sensor With Automatic Child Seat Recognition - Function

- up to 31.5.06
- with CODE (494) USA version
- up to Model Year 8
- except CODE (494) USA version

Seat occupied recognition sensor

If the front passenger seat is occupied by a person, the pressure load of the seat area increases. This changes the resistance of the force sensing resistors
in the sensor mat. If the pressure on the seat surface exceeds a defined value, the electronic analysis system detects that the front passenger seat is
occupied by a person and transmits an "occupied" signal to the restraint systems control unit (N2/7). The seat occupation status is continuously
monitored. After the load on the front passenger seat has been removed, the occupied signal is retained for approximately 2 min. The signal is retained to
prevent immediate shutoff of the safety devices if the load on the front passenger seat is removed for a short period.

Automatic child seat recognition

The functionality of the automatic child seat recognition is only given where a Mercedes-Benz approved and control-unit coded child seat are used. This
child seat must be equipped with 2 transponders, which are located in its base on the left and right. Where a child seat is in its position, the signals from
the transponders located in the child seat, which the electronic analysis system sends via the transmitting antennas, are changed. These signals are picked
up by the respective receiving antennas in the sensor mat and forwarded to the electronic analysis system. The front passenger seat occupied and child
seat recognition sensor (B48) evaluates these signals and notifies the restraint systems control unit (N2/7) about the following statuses:

^

Child seat present/not present

^

Child seat installed facing/facing away from direction of travel

GF91.60-P-1100SK Front Passenger Seat Occupied Recognition Sensor, Function|Page 2595 > < GF91.60-P-1100SK Front Passenger Seat Occupied Recognition Sensor, Function|Page 2593