SLK 350 (171.456) V6-3.5L (272.963) (2006)
Camber Adjustments
Caster Adjustments
Camber And Caster Adjustments
Component Identification
1
Remove mounting bolt (A).
For the adjustment of camber and caster the respective mounting bolt (19a) with shims must be replaced by a repair bolt (19c) with shims. This
enables an adjustment of 4 mm towards + or - to be achieved.
2
Install repair bolt (B).
When tightening the nut (19b) ensure that the repair bolt (19c) is not twisted otherwise the lugs in the inner core of the respective rubber mount
will be sheared off and as a result the rubber mount becomes unusable.
AR40.20-P-0322-03V Check Caster, Compare With Figure In Table
AR40.20-P-0322-03V Check caster, compare with figure in table