SLK 350 (171.456) V6-3.5L (272.963) (2006)
Wiper Motor: Procedures
AR82.30-P-6800-01V Move Wiper Motor To Parking Position
1
Locate the wiper system in position with the nuts (1).
2
Position the wiper rods (2) so they are outside of the rotating radius of the wiper motor crank (3).
3
Plug the electrical connector (4) into the wiper motor (M6/1).
4
Switch on the ignition, turn the combination switch to position 2 and turn it back to position 0. Switch off the ignition as soon as the wiper motor
(M6/1) stops in park position.