mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.70-P-3020RC Voice Control, Function|Page 14215 > < GF82.70-P-3020RC Voice Control, Function|Page 14213
Page 4
background image

Component Identification

Location

The VCS [SBS] switch is located on the right of the steering column tube module.

Task

^

Receiving signals

^

Transmitting signals

Receiving signals
Direct line

-

Power supply from the steering column tube module via a direct line

Transmitting signals
Direct line

-

Switch-on signal from the voice control of the voice control system (VCS [SBS]) to the steering column tube module via a direct line

-

Switch-off signal from the voice control of the VCS [SBS] to the steering column tube module via a direct line

GF82.85-P-3001SK Voice Output, Function

GF82.85-P-3001SK Voice Output, Function

- with CODE (525) MB Audio 50 APS radio
- with CODE (527) COMAND APS with single DVD drive (with navigation)

The navigation processor of the radio and navigation unit (A2/56) with code (525) Audio 50 APS MB radio is integrated into the control unit. On the
COMAND operating, display and control module (A40/3) with code (527a) COMAND APS (with navigation) the external navigation module is called
navigation processor (N41/1).

The navigation system route guidance (based on DVD data) is supported significantly by voice output:

^

Direction information

^

Name of street at which to turn

For streets without names, the "compass direction" (north, south, east and west) is specified. The compass direction is omitted in the case of streets (e.g.,
in towns) which are designated by a name.

The voice data is originally stored in the form of individual word segments on the navigation DVD-ROM. This data record is automatically transferred
from the DVD-ROM to the navigation processor (N41/1) and stored there.The navigation processor (N41/1) links these word segments into complete
instructions or information and generates corresponding signals. If required the signals thus generated are passed on via MOST (media oriented system
transport) to the audio signal processing in the audio gateway control module (N93/1), are amplified there and then output via the vehicle loudspeakers.

Several driving recommendations in quick succession are combined into a single voice output.

GF82.70-P-3020RC Voice Control, Function|Page 14215 > < GF82.70-P-3020RC Voice Control, Function|Page 14213