SLK 55 AMG (171.473) V8-5.5L (113.989) (2005)
8. Then attach linkage to the motor (Figure 5).
Caution!
Exercise care when installing the new linkage. The linkage may be damaged if installed forcefully.
9. Install linkage protection strut (Retrofit in right seats up to VIN...191914)
a. Loosen and remove hold down device for the dust cap on the upper rail on the linkage side (Figure 6).
b. With the hold down device removed, replace the hex bolt with the one provided in the replacement set and tighten to 15 Nm.
c. Remove the rear bolt on the linkage side of the upper rail (behind the bolt removed in step 1)
d. Place the linkage protection strut from the replacement part set as illustrated in Figures 7 and 9.