SLK 55 AMG (171.473) V8-5.5L (113.989) (2005)
/v8-5.5l_(113.989)/Page-965002.png)
Component Identification
4
Position the outer part (2) of the mounting tool.
Use outer part (2) with chamfer.
5
Screw in bolt (3) until a resistance is felt.
6
Detach the mounting tool.
Component Identification
7
Check installation location of the crankshaft rear radial sealing ring (4).
The rear crankshaft radial sealing ring (4) must be positioned at right angles to the crankshaft (7) otherwise proper sealing is not assured.
The clearance between the edge of the end cover (8) and the rear crankshaft radial sealing ring (4) must be approx. 1 mm (dimension a) around the
entire circumference.
