Sprinter 2500 Crew (906.735) V6-3.0L DSL Turbo (642.898) (2010)
Maintenance Required Lamp/Indicator: Service and Repair
With Multifunction Steering Wheel With Trip Computer
AP00.20-D0040-01HB Reset Service Processor
1
Switch on ignition. The total kilometers must be displayed in order to reach the "service scope x in xxx km" menu. Should the total kilometers
not be shown in the display, press the system selection button in the lower control panel (S111s3) until the total kilometers are displayed.
2
Press the upper control panel on the scroll forward/back button (S111s1) several times until "service scope x in xxx km" appears in the
multifunction display of the instrument cluster.
3
Press button 0 (1) on the instrument cluster for approx. 30 s until a beep sounds.
4
Press the lower control panel of the system selection button (S111s3) once.
5
Press the upper control panel of the scroll forward and back button (S111s1) until "Service in xxx km" appears in the multifunction display of
the instrument cluster.
6
Press button 0 (1) on the instrument cluster. The menu "Carry out" (Carry out as display in the multifunction display) appears in the
multifunction display of the instrument cluster.
7
Press the upper control panel on the scroll forward and back button (S111s1). The selection menu "Oil types" appears in the multifunction
display of the instrument cluster
8
Press the upper control panel on the button + and - (S110s1) repeatedly until the desired oil type is marked in the multifunction display of the
instrument cluster.
Note:
The following oil types appear in the multifunction display of the instrument cluster:
Diesel engine with long oil change interval: Qual. 228.51 (older instrument clusters 229.5)