mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Idle Speed/Throttle Actuator - Mechanical > < Idle Speed/Throttle Actuator - Electronic|Specifications|Page 2490
Page 1
background image

Idle Speed/Throttle Actuator - Electronic: Service and Repair

1.

Disconnect air bypass valve electrical connector from wiring harness.

2.

Remove two air bypass attaching screws and valve.

3.

Remove and discard gasket.

4.

Reverse procedure to install, using new gasket. Torque valve attaching screws to 71 - 102 inch lbs.

Idle Speed/Throttle Actuator - Mechanical > < Idle Speed/Throttle Actuator - Electronic|Specifications|Page 2490