Capri L4-1597cc 1.6L DOHC (1992)
Front Steering Knuckle: Specifications
Description .......................................................................................................................................................................................................... Nm (lb-ft)
Control Arm Front Bolt ............................................................................................................................................................... 93-117 Nm (69-86 lb-ft)
Control Arm Rear Nut ................................................................................................................................................................... 75-93 Nm (55-69 lb-ft)
Control Arm Bracket Bolt ............................................................................................................................................................. 59-74 Nm (44-54 lb-ft)
Shock Absorber Bolt ..................................................................................................................................................................... 93-97 Nm (69-72 lb-ft)
Ball Joint to Control Arm Bolt .................................................................................................................................................... 93-117 Nm (69-86 lb-ft)
Ball Joint Clamp Bolt .................................................................................................................................................................... 43-54 Nm (32-40 lb-ft)
Steering Knuckle to Strut Bolt .................................................................................................................................................... 93-117 Nm (69-86 lb-ft)
Strut Rod Nut ................................................................................................................................................................................ 29-36 Nm (22-27 lb-ft)
Strut Assembly to Body Nut .......................................................................................................................................................... 23-29 Nm (17-22 lb-ft)
Wheel Lug Nut ............................................................................................................................................................................ 90-120 Nm (65-88 lb-ft)
Brake Caliper Retaining Bolts ....................................................................................................................................................... 39-49 Nm (29-36 lb-ft)
Halfshaft Retaining Nuts ....................................................................................................................................................... 157-235 Nm (116-174 lb-ft)
Tie Rod to Steering Knuckle Retaining Nuts [1] ........................................................................................................................... 29-44 Nm (22-33 lb-ft)
Stabilizer Link Retaining Bolts [2] .................................................................................................................................................................................. --
Hub to Rotor Retaining Bolts ........................................................................................................................................................ 44-54 Nm (33-40 lb-ft)
Caliper to Knuckle ........................................................................................................................................................................ 39-49 Nm (29-36 lb-ft)
[1]Tighten to Torque Specification, then continue to tighten to nearest cotter pin slot.
[2]Tighten nut until 10.8mm (0.43 inch0 of the bolt threads extend beyond the nut.
