Capri L4-1597cc 1.6L DOHC (1992)
(2).Spacer Thickness: 7.
(3).Required Spacer: 11.
A change of four will change bearing preload by 0.8-1.6 N.m(6.8-14.0 lb-in).
4 x 0.2 to 0.4 = 0.8 to 1.6.
(4 x 1.7 to 3.5 = 6.8 to 14.0 lb-in).
Example
When subtracted from the existing preload, the measured preload will now be 0.30-1.10 N.m(2.82-10.02 lb-in).
After selecting a spacer, verify the bearing preload using Spacer Selection Tool T87C-1104-B.
9. Install the brake rotor/wheel hub assembly.
Removal
Tools required:
Description and Tool Number
Tie Rod End Separator ... T85M-3395-A
1. Raise vehicle.
2. Remove the tire and wheel assembly.
Raising The Staked Portion Of The Halfshaft
3. Carefully raise the staked portion of the halfshaft attaching nut using a small cape chisel.
4. Remove halfshaft retaining nut and washer Discard the nut.
NOTE: When loosening the nut, lock the hub by applying the brakes.