Capri L4-1597cc 1.6L DOHC (1992)
12. Pry downward on the lower control arm to separate the ball joint from the steering knuckle.
Remove Steering Knuckle Bolt
13. Remove the steering knuckle to strut retaining bolts.
Slide Out Steering Knuckle
14. Slide the front hub/steering knuckle assembly out of its bracket in the strut and off the end of the halfshaft. Use care to prevent damage to the
grease seals.
Two Jaw Puller Or Hub Puller
NOTE: If the hub binds on the halfshaft splines, it can be loosened by lightly tapping with a plastic faced hammer on the end of the halfshaft.
CAUTION: Never use any type of metal faced hammer to separate the halfshaft from the hub. Damage to the Constant Velocity (CV) joint
internal components will result. If the halfshaft splines become rusted to the hub, a two jaw puller or hub puller must be used to separate them.
Installation
Tools required:
