Capri L4-1597cc 1.6L DOHC (1992)
Description and Tool Number
Tie Rod End Separator ... T85M-3395-A
Removing Hub.
1. Position the front hub/steering knuckle assembly over the halfshaft and into the strut.
Position Ball Joint Through Steering Knuckle
2. Install the steering knuckle to strut retaining bolts and nuts. Tighten the retaining nuts to 93-117 N.m (69-86 lb-ft).
3. Position the lower control arm ball joint through the steering knuckle and install the clamp bolt and nut. Tighten the clamp bolt to 43-54 N.m
(32-40 lb-ft).
