Capri L4-1597cc 1.6L DOHC (1992)
Install Brake Caliper
4. Position the brake caliper over the rotor and install the retaining bolts. Tighten to 39-49 N.m (29-36 lb-ft).
5. Install the U-clip on the caliper flex line.
6. Install a new halfshaft retaining nut. Tighten to 157-235 N.m (116-174 lb-ft).
Stake The Halfshaft
7. Stake the halfshaft attaching nut using a cold chisel with the cutting edge rounded.
CAUTION: If the nut splits or cracks after staking, it must be replaced with a new nut.
Connect Tie Rod To Steering Knuckle
8. Connect the tie rod to the steering knuckle arm and install the retaining nut. Tighten to 29-44 N.m (22-33 lb-ft) and install a new cotter pin.
NOTE: If the slots in the nut do not align with the cotter pin hole in the ball joint stud, tighten the nut for proper alignment. Never loosen the nut.
