Capri L4-1597cc 1.6L DOHC Turbo (1991)
retaining bolts to 44-54 N.m (33-40 lb-ft).
Install Hub And Rotor In Steering Knuckle
11. Install the hub and rotor assembly in the steering knuckle using a hydraulic press and suitable fixtures.
Disassembly
Tools required:
Description and Tool Number
Bearing Cup Replacer ... D79P-1202-A
Spacer Selection Tool ... T87C-11O4-B
Disassembled View
NOTE: If the bearings and races are to be reused they must be labeled so that they can be installed in their original positions.
1. Remove the wheel hub/brake rotor assembly.
2. Remove the inner bearing from the steering knuckle.
3. Remove the bearing races from the steering knuckle using a brass drift.
Assembly
Tools required:
Description and Tool Number
Bearing Cup Replacer ... D79P-1202-A
Spacer Selection Tool ... T87C-11O4-B