Capri L4-1597cc 1.6L DOHC Turbo (1991)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
REMOVAL
1.
Disconnect the negative battery cable.
2.
Drain the radiator.
3.
Disconnect the Engine Coolant Temperature (ECT) sensor electrical connector.
4.
Using a suitable wrench, remove the ECT sensor from the intake manifold.
Engine Coolant Temperature (ECT) Sensor
INSTALLATION
1.
Install the ECT sensor.
2.
Connect the ECT sensor electrical connector.
3.
Refill the cooling system.
4.
Connect the negative battery cable.
