Capri L4-1597cc 1.6L DOHC Turbo (1991)
Turbo Vehicle
5. Remove the stabilizer bar attaching nut and link.
6. Remove cotter pin and tie rod end retaining nut.
Separate The Tie Rod From The Steering Knuckle
7. Separate the tie rod end from the steering knuckle arm using Tie Rod End Separator T85M-3395-A. If tie rod end does not separate easily, give
the steering knuckle a sharp blow with a soft faced hammer.
8. Remove U-shaped retaining clip from the center section of the caliper flex hose.
9. Remove the disc brake pads.
Remove The Brake Caliper
10. Remove the brake caliper retaining bolts. Lift caliper off the rotor and suspend it from the suspension coil spring.