mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Engine - Spark Knock/Detonation|Page 1165 > < Engine - Spark Knock/Detonation|Page 1163
Page 3
background image

replaced.

4.

Check to be sure the EGR valve is functional per Section 29-15 of the Car Shop Manual.

5.

Test vehicle to determine if detonation is eliminated.

6.

Retard the ignition timing in 2° increments to a maximum of 6° from the specification on the Vehicle Emission Decal. Refer to Car Shop Manual,
Section 29-02.

NOTE:

Light detonation during a heavy crowd drive mode is acceptable.

7.

Check idle speeds. Reset as required.

8.

Prepare an Authorized Modifications decal (FPS-8262) and list the date of service, dealer number and modifications performed as shown. Select a
prominent place adjacent to the Vehicle Emission Control Information decal. Clean the area, install the decal and cover it with a clear plastic
shield.

WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.

OPERATION: SP-12199-A-82
TIME: 1.0 Hrs.

DLR. Coding: Basic Part No.: DRIVE - Code: H9

Technical Service Bulletin # 82912

Date: 820513

Engine - Cold Weather Stalling

Article No: 82-9-12
May 13, 1981

Subject:
Cold Weather Stalling with 7200 Carburetor

FORD
1982 With 4.2/5.OL Engine and Model 7200 Carburetor

LINCOLN-MERCURY
1982 With 4.2/5.OL Engine and Model 7200 Carburetor

Calibrations Affected:
4.2L (1-18UR00/2-18UR10/2-18UR11)
5.OL (1-20NR10)

WARNING:

This Modification Is Authorized Only For The Listed Engine Calibrations. Performing This Modification On Other Engine Calibrations Is
Unauthorized And Could Create Liability Under Applicable Federal Or Local Laws.

Engine - Spark Knock/Detonation|Page 1165 > < Engine - Spark Knock/Detonation|Page 1163