Colony Park V8-302 5.0L VIN F FI (1985)
Installation
1.
Position spacers above and below converter.
2.
Attach the heat shields.
3.
Insert converter hanger rods into the hanger brackets.
4.
Position converter to inlet pipes using new gaskets and install attaching bolts. Do not tighten bolts.
5.
Position muffler inlet flange to converter outlet flange and install attaching nuts. Do not tighten nuts.
6.
Align exhaust system, refer to appropriate illustration.
7.
With exhaust system aligned:
a. Tighten converter to inlet pipe bolts to 27-41 N-m (20-30 Lb.Ft.).
b. Tighten muffler inlet pipe to converter outlet flange attaching nuts to 27-41 N-m (20-30 Lb.Ft.).
c. Install the new air tube and check valve.
8.
Check system for leaks and lower vehicle.
