mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Engine - No Start/Idles Rough/Knock When Cold|Page 1205 > < Engine - No Start/Idles Rough/Knock When Cold|Page 1203
Page 5
background image

This article is being republished to revise Test 5.

The above concerns can be caused by the distributor Hall Effect sensor. When the above concerns occur only at cold temperatures and the engine starts
and runs satisfactorily when warm, use the first diagnostic procedure. If the concern is no start, use the second procedure.

If a T.F.I. is removed from the distributor and the stator connector is soft or mushy, replace the stator.

OTHER APPLICABLE ARTICLES: NONE 
WARRANTY STATUS: "INFORMATION ONLY"

TFI Module Side of the SPOUT Connector

Engine - No Start/Idles Rough/Knock When Cold|Page 1205 > < Engine - No Start/Idles Rough/Knock When Cold|Page 1203