mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Sensors and Switches - Steering and Suspension > < Alignment|Specifications|Page 5342
Page 1
background image

Suspension Control Module: Service and Repair

1985 Crown Victoria, Grand Marquis & 1985---86 Lincoln Town Car

1.

 Disconnect battery ground cable.

2.

 Disconnect module connector by pushing in on retainer and pulling connector upward.

3.

 Remove module to compressor bracket bolts, then the module.

4.

 Reverse procedure to install. Torque attaching bolts to 30---40 inch lbs.

Sensors and Switches - Steering and Suspension > < Alignment|Specifications|Page 5342