mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Rear Bumper Cover / Fascia|Service and Repair|Page 7577 > < Front Bumper Reinforcement|Service and Repair
Page 1
background image

Rear Bumper Cover / Fascia: Service and Repair

REAR BUMPER COVER

Removal

1. Remove the rear lamp assemblies.
2. Loosen the right-hand and left-hand rear wheel nuts.
3. Raise and support the vehicle.
4. Remove the rear wheels.

5. Detach the anti-lock braking system sensor and the brake pad wear wiring from the clips.

6. Remove the fender splash shields.

7. Detach the bumper cover from the fenders

8. Detach the license plate lamps

Rear Bumper Cover / Fascia|Service and Repair|Page 7577 > < Front Bumper Reinforcement|Service and Repair