Cougar V6-153 2.5L DOHC VIN L SFI (2001)
Liftgate Window Glass: Service and Repair
General Equipment
^
Hot air gun
^
Pneumatic knife with offset blade
^
Interior auto glass cut-out knife kit
REMOVAL
1. Heat the Polyurethane (PU) adhesive if necessary.
NOTE: Should the ambient temperature fall below 10°C, heat the cartridges for approximately 15 minutes by placing them on a warm radiator,
or by using a hot air gun set at approximately 25°C.
2. Remove the liftgate interior trim panel.
3. Disconnect the rear window electrical connectors.
4. Remove the rear window wiper.
