mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Subframe|Description and Operation|Page 7698 > < Subframe|Description and Operation|Page 7696
Page 6
background image

Vehicles with 2.5L engine

20. Use the special tool 211-202. Remove the steering gear (two bolts) and tie it up (left-hand side shown).

Vehicles with automatic transmission

21. Disconnect the right-hand engine support insulator.

WARNING:  Support the subframe using Rotunda Powertrain Lift. Place a wooden block approximately 40 inches in length secured to lift
under subframe. Failure to follow this procedure may result in personal injury.

22. Remove the subframe bolts and subframe.
23. Lower the vehicle.

Installation

Subframe|Description and Operation|Page 7698 > < Subframe|Description and Operation|Page 7696