Cougar V6-153 2.5L DOHC VIN L SFI (2001)
5. Use the special tool 211-202. Install the steering gear (two bolts) (left-hand side shown).
Vehicles with automatic transmission
6. Install the right-hand engine support insulator.
Vehicles with 2.5L engine
7. Install the steering gear heat shield.
8. NOTE: Verify that the left-hand support insulator is centered in the transaxle bracket and in perfect front to rear alignment before tightening the
through bolt.
Install the LR engine support insulator.
1. Position the front support insulator.
2. Install the nuts.
3. Install the through bolt.
Vehicles with automatic transaxle
