Cougar V6-153 2.5L DOHC VIN L SFI (2001)
5. Install the accelerator pedal assembly.
1
Install the nuts.
2
Connect the accelerator cable.
6. Install the brake pedal position switch.
1
Install the switch.
2
Connect the electrical connector.
7. Install the stop lamp switch.
1
Pull the switch plunger out to its full extent.
2
Depress the brake pedal.
3
Install the stop lamp switch.
4
Slowly release the brake pedal.
8. Connect the electrical connector.
9. Install the brake booster actuator rod retaining clip.