mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Disc Brake System > < Brake Pedal and Bracket - Automatic Transmission|Page 5562
Page 8
background image

13. Install the stop lamp switch.

1

Pull the switch plunger out to its full extent.

2

Depress the brake pedal.

3

Install the stop lamp switch.

4

Slowly release the brake pedal.

14. Connect the electrical connector.

15. Install the steering column support bracket.

16. Install the instrument panel lower panel.

1

Install the screws.

2

Install the screw covers.

17. Connect the battery ground cable.

Disc Brake System > < Brake Pedal and Bracket - Automatic Transmission|Page 5562