Cougar V6-153 2.5L DOHC VIN L SFI (2001)
5.
Remove adhesive backing protection from new pads with C-springs (Figure 2) and install new pads into caliper. Use Pads XS7Z-2200-M for
vehicles without Pad Wear Sensors (PWS) or XS7Z-2200-BA for vehicles with Pad Wear Sensors (PWS).
NOTE
ENSURE THAT, WHEN INSTALLED, THE C-SPRINGS SIT ON THE EDGE OF THE CALIPER (SEE FIGURE 3).
6.
Reinstall caliper. Refer to the Workshop Manual, Section 100-01.
