Cougar V6-153 2.5L DOHC VIN L SFI (2001)
Brake Master Cylinder: Service and Repair
Removal and Installation
Removal
1. CAUTION: If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.
NOTE: Make sure the filler cap does not become contaminated.
Remove the reservoir filler cap.
1
Disconnect the electrical connector.
2
Remove the cap.
2. Using a suitable suction device drain the reservoir.
Vehicles with manual transaxle
3. Disconnect the clutch master cylinder feed hose.
All vehicles