mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Heater Core|Page 3050 > < Heater Core|Page 3048
Page 6
background image

9. Disconnect the right and left-hand air hose from the heater/evaporator core housing (left-hand side shown).

10. Disconnect the air distributor from the heater/evaporator core housing (housing shown removed).

11. Remove the heater outlet floor duct from the heater/evaporator core housing.

1. Remove the screw.
2. Slide the air duct upwards.
3. Release the retaining tabs on each side and remove the heater outlet floor duct.

12. Remove the heater/evaporator core housing.

INSTALLATION

1. To install, reverse the removal procedure.
2. Check heating and air conditioning system for normal operation.

Heater Core|Page 3050 > < Heater Core|Page 3048