Mercury Workshop Service and Repair Manuals > Cougar V6-153 2.5L DOHC VIN L SFI (2001) > Engine, Cooling and Exhaust | Engine | Camshaft, Lifters and Push Rods | Variable Valve Timing Actuator | Component Information | Description and Operation | Variable Cam Timing System

Variable Cam Timing System|Page 2674 > < Variable Cam Timing System|Page 2672

Page 3

in the chamber is designed to hold the camshaft in the minimum overlap position (5 degrees) when oil pressure is too low to maintain adequate
position control. The camshaft is allowed to rotate up to 30 degrees.

Engine, Cooling and Exhaust
Engine
Camshaft, Lifters and Push Rods
Variable Valve Timing Actuator / Component Information
Description and Operation / Variable Cam Timing System
Page 2673

Variable Cam Timing System|Page 2674 > < Variable Cam Timing System|Page 2672

Mercury Workshop Service and Repair Manuals

Cougar V6-153 2.5L DOHC VIN L SFI (2001)

Engine, Cooling and Exhaust Engine Camshaft, Lifters and Push Rods Variable Valve Timing Actuator / Component Information Description and Operation / Variable Cam Timing System Page 2673

Engine, Cooling and Exhaust Engine Camshaft, Lifters and Push Rods Variable Valve Timing Actuator / Component Information Description and Operation / Variable Cam Timing System Page 2673

Engine, Cooling and Exhaust
Engine
Camshaft, Lifters and Push Rods
Variable Valve Timing Actuator / Component Information
Description and Operation / Variable Cam Timing System
Page 2673

Engine, Cooling and Exhaust
Engine
Camshaft, Lifters and Push Rods
Variable Valve Timing Actuator / Component Information
Description and Operation / Variable Cam Timing System
Page 2673