Cougar V6-153 2.5L DOHC VIN L SFI (2001)
-
Apply silicone gasket and sealant where indicated.
3. Tighten the valve cover bolts in the indicated sequence.
4. Install the right-hand wiring harness shield and two nuts.
5. Install the in-line connector bracket to the righthand valve cover.
6. NOTE: Make sure that the ground cable is in position when installing the ignition coil.
Install the ignition coil.
1
Position the ignition coil.
2
Install the bolts.
-
Connect the radio suppressor and ground cable.
3
Connect the electrical connectors.