Cougar V6-153 2.5L DOHC VIN L SFI (2001)
8. Install the radiator coolant expansion tank.
9. NOTE: The self-locking nuts must be replaced.
NOTE: Make sure that the new nuts are aligned with the marks on the engine support bracket.
Install the upper front engine support bracket.
10. Remove the three bar engine support and universal lifting eye.
11. Raise and support the vehicle.
12. NOTE: Verify that the right-hand engine support insulator is centered in the transaxle bracket and in perfect front-to-rear alignment before
tightening the through bolt or the mounting bolts.
Install the right-hand engine support insulator bolts.
-
Install the insulator through bolt.
-
Install the insulator mounting bolts.