Cougar V6-153 2.5L DOHC VIN L SFI (2001)
Engine Mount: Service and Repair
Mount Neutralizing Following Engine Installation
Automatic Transaxle
Powertrain/Drivetrain Mount Neutralizing Following Engine Installation
Special Tools
SPECIAL TOOL(S)
1. NOTE:
^
Alignment of the engine/transaxle assembly is necessary in the case of any repairs to the subframe and support insulators, or if the engine starts
to make booming noises.
^
The locations of support insulators and engine support insulators are described looking from the transaxle to the engine.
^
Steps which apply only to particular variants are indicated with a note.
2. Disconnect the battery ground cable.
3. Remove the battery.
4. Remove the Air Cleaner (ACL).
1. Disconnect the crankcase ventilation hose.
2. Disconnect two clips.
3. Disconnect the intake hose.
